Publications

PUBLICATIONS

Journals and Transactions (published or accepted)

      54 journal papers published or accepted

      33 journal papers published or accepted since joining The University of Texas at Austin

  1. M. Musselman, H. Xie and D. Djurdjanovic, “Identification of Individual Slit Valves in Semiconductor Manufacturing Equipment and Their Monitoring Using Vibration Signatures”, accepted for Computers in Industry, Paper No. JIMS-D-16-00460, 2016.
  2. A. Ul Haq and D. Djurdjanovic, “Stabilizing Dual-Mode Model Predictive Control Algorithms for Nonlinear Dynamic Systems,” accepted for publication in the ASME Journal of Dynamic Systems and Control, Paper No. Paper No. DS-16-1165, 2016.
  3. D. Zhang, A. D. Bailey, III, and D. Djurdjanovic, “Bayesian Identification of Hidden Markov Models and Their Use for Condition-Based Monitoring,” IEEE Transactions on Reliability, Vol. 65, No. 3, pp. 1471-1482 September 2016.
  4. M. Musselman, D. Gates and D. Djurdjanovic, “A System-Based Approach to Monitoring a Human Neuromusculoskeletal System,” International Journal of Prognostics and Health Management, Vol. 7, No. 2, pp. 1-14, August 2016.
  5. A. Bleakie and D. Djurdjanovic, “Growing Structure Multiple Model System For Virtual Metrology in Manufacturing Processes,” IEEE Transactions on Semiconductor Manufacturing, Vol. 29, No. 2, pp. 79-97, May 2016.
  6. M. Celen and D. Djurdjanovic, “Integrated Maintenance Decision-Making and Product Sequencing in Flexible Manufacturing Systems” ASME Journal of Manufacturing Science and Engineering, Vol. 137, No. 4, pp. 041006-1 - 041006-15, August 2015.
  7. A. Ul Haq and D. Djurdjanovic, “Precedent-Free Fault Localization and Diagnosis for High Speed Train Drive Systems,” Facta Universitatis: Mechanical Engineering Series, University of Nis Press, Vol. 13, No. 2, pp. 67-79, August 2015.
  8. M. Cholette and D. Djurdjanovic, "Context Dependent Degradation Modeling Using Hidden Markov Models," IIE Transactions on Quality and Reliability Engineering[1], Vol. 46, No. 10, pp. 1107-1123, 2014.
  9. M. Cholette, M. Celen, D. Djurdjanovic and J. Rasberry, “Condition Based Monitoring and Operational Decision Making in Semiconductor Manufacturing”, IEEE Transactions on Semiconductor Manufacturing, Vol. 26, No. 4, pp. 454-464, 2013
  10. A. Bleakie and D. Djurdjanovic, “Analytical Approach to Similarity-Based Prediction of Manufacturing System Performance," Computers in Industry, Vol. 64, No. 6, pp. 625-633, 2013.
  11. A. Bleakie and D. Djurdjanovic, “Feature Extraction, Condition Monitoring and Fault Modeling of an Industrial PECVD Tool," Computers in Industry, Vol. 64. No. 3, pp. 203-213, 2013
  12. M. Celen and D. Djurdjanovic, “Operation-Dependent Maintenance Scheduling in Flexible Manufacturing Systems,” CIRP Journal of Manufacturing Science and Technology[2], Vol. 5, No. 4, pp. 296-308, 2012.
  13. K. Carpenter, D. Djurdjanovic and A. da Silva, “Fault Detection and Precedent-free Localization in Numerically Discretized Thermal-fluid Systems,” Expert Systems With Applications, Vol. 39, No. 17, pp. 12858-12868, 2012.
  14. M. Musselman and D. Djurdjanovic, “Time-Frequency Distributions in the Classification of Epilepsy from EEG Signals,” Expert Systems with Applications, Vol. 39, No. 13, pp. 11413–11422, 2012.
  15. M. E. Cholette, J. Liu, D. Djurdjanovic and K. Marko, “Monitoring of Complex Systems of Interacting Dynamic Systems,” Applied Intelligence, vol. 37, no. 1, pp. 60-79, 2012.
  16. M. Cholette and D. Djurdjanovic, “Precedent-Free Fault Isolation in a Diesel Engine EGR System”, Transactions of ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 134, No. 3, pp. 031007-1 – 031007-11, 2012.
  17. M. Musselman and D. Djurdjanovic, “Tension Monitoring in a Belt-Driven Automated Material Handling System,” CIRP Journal of Manufacturing Science and Technology, Vol. 5, No. 1, pp. 67-76, 2012.
  18. Y. Jiao and D. Djurdjanovic, “Compensability of Errors in Product Quality in Multistage Manufacturing Processes”, SME Journal of Manufacturing Systems, Volume 30, No. 4, pp. 204-213, 2011.
  19. Y. Jiao and D. Djurdjanovic, “Stochastic Control of Multilayer Overlay in Lithography Processes”, IEEE Transactions on Semiconductor Manufacturing, Vol. 24, No. 3, pp. 404-417, 2011.
  20. Y. Lei, D. Djurdjanovic, L. Barajas, G. C. Workman, J. Ni and S. Biller, “DeviceNet Network Health Monitoring Using Physical Layer Parameters”, Journal of Intelligent Manufacturing, Vol. 22, pp. 289-299, 2011.
  21. Y. Lei, D. Djurdjanovic and J. Ni, “DeviceNet Reliability Assessment Using Physical and Data Link Layer Parameters”, Quality and Reliability Engineering International, Vol. 26, pp. 703-715, 2010.
  22. Y. Jiao and D. Djurdjanovic, “Joint Allocation of Measurement Points and Controllable Tooling Machines in Multistage Manufacturing Processes”, IIE Transactions on Quality and Reliability Engineering[3],[4], Vol. 42, pp. 703-720, 2010.
  23. Y. Lei and D. Djurdjanovic, “Diagnosis of Intermittent Connections for DeviceNet,” Chinese Journal of Mechanical Engineering (English Edition published by Elsevier), Vol. 23, No. 5, pp. 606-612, 2010.
  24. J. Roth, D. Djurdjanovic, X. Yang, L. Mears and T. Kurfess, “Quality and Inspection of Machining Operations: Tool Condition Monitoring”, Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 132, No. 4, pp. 041015-1 - 041015-16, 2010.
  25. D. Djurdjanovic, R. Kegg, J. Lee and J. Ni, “Generic Multisensor Based Assessment of Performance of Manufacturing Processes”, Transactions of NAMRI/SME, Vol. 38, pp. 379-386, 2010.
  26. L. Mears, J. Roth, D. Djurdjanovic, X. Yang and T. Kurfess, “Quality and Inspection of Machining Operations: CMM Integration to the Machine Tool”, Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 131, No. 5, pp. 051006-1- 051006-13, 2009.
  27. J. Liu, D. Djurdjanovic, K. Marko and J. Ni, “Growing Structure Multiple Model System for Anomaly Detection and Fault Diagnosis”, Transactions of ASME, Journal of Dynamic Systems, Measurement and Control[5], Vol. 131, No. 5, pp. 051001-1 – 051001-13, 2009.
  28. J. Liu, D. Djurdjanovic, K. A. Marko and J. Ni, “A Divide and Conquer Approach to Anomaly Detection, Localization and Diagnosis”, Mechanical Systems and Signal Processing, Vol. 23, No. 8, pp. 2488-2499, 2009.
  29. J. Liu and D. Djurdjanovic, “Topology Preservation and Cooperative Learning in Identification of Multiple Model Systems”, IEEE Transactions on Neural Networks, Vol. 19, No. 12, pp. 2065-2072, 2008.
  30. M. Zhang, E. Levina, D. Djurdjanovic and J. Ni, “Estimating Distribution of Surface Parameters for Classification Purposes”, Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 130, No. 4, pp. 031010-1 – 031010-9, 2008.
  31. Z. Yang, D. Djurdjanovic and J. Ni, “Maintenance Scheduling in Manufacturing Systems Based on Predicted Machine Degradation”, Journal of Intelligent Manufacturing, Vol. 19, No. 2, pp. 87-98, 2008.
  32. J. Zhou, D. Djurdjanovic, J. Simmons-Ivy and J. Ni, “Integrated Reconfiguration and Age-Based Preventive Maintenance Decision Making”, IIE Transactions on Quality and Reliability Engineering[6], Vol. 39, No. 12, pp. 1085-1102, 2007.
  33. Z. Yang, D. Djurdjanovic and J. Ni, “Maintenance Scheduling for a Manufacturing System of Machines with Adjustable Throughput”, IIE Transactions on Quality and Reliability Engineering, Vol. 39, No. 12, pp. 1111-1125, 2007.
  34. D. Djurdjanovic and J. Ni, “On-Line Stochastic Control of Dimensional Quality in Multi-Station Manufacturing Systems”, Journal of Engineering Manufacture, Vol. 221, No. B5, pp. 865-880, 2007.
  35. Z. Yang, Q. Chang, D. Djurdjanovic, J. Ni and J. Lee, “Maintenance Priority Assignment Utilizing On-Line Production Information,” Transaction of ASME, Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp. 435-446, 2007.
  36. M. Zhang, D. Djurdjanovic and J. Ni, “Diagnosibility and Sensitivity Analysis for Multi-Station Machining Processes”, International Journal of Machine Tools and Manufacture, Vol. 47, pp. 646-657, 2007.
  37. J. Liu, D. Djurdjanovic, J. Ni, N. Casoetto and J. Lee, “Similarity Based Method for Manufacturing Process Performance Prediction and Diagnosis”, Computers in Industry, Vol. 58, pp. 558–566, 2007.
  38. D. Djurdjanovic and J. Ni, “Stream of Variation (SOV) Based Measurement Scheme Analysis in Multi-Station Machining Systems,” IEEE Transactions on Automation Science and Engineering, Vol. 3, No. 4, pp. 407-422, 2006.
  39. M. Zhang, J. Zhu, D. Djurdjanovic and J. Ni, “A Comparative Study on the Classification of Engineering Surfaces with Dimension Reduction and Coefficient Shrinkage Methods”, SME Journal of Manufacturing Systems, Vol. 25, No. 3, pp. 209-220, 2006
  40. J. Lee J. Ni, D. Djurdjanovic, H. Qiu and H. Liao, “Intelligent prognostics tools and e-maintenance”, Computers in Industry, Vol. 57, Issue 6, pp. 476-489, 2006.
  41. Y. Lei, D. Djurdjanovic, J. Ni, J. Lee, G. Xiao and J. R. Mayor, “System Level Optimization of Predictive Maintenance in Industrial Automation Systems”, Transactions of NAMRI/SME, Vol. 34, pp. 79-86, 2006.
  42. G. Yu, H. Qiu, D. Djurdjanovic and J. Lee, “Feature Signature Prediction of a Boring Process Using Neural Network Modeling with Confidence Bounds”, International Journal of Advanced Manufacturing Technology, Vol. 30, No. 7-8, pp. 614-621, 2006.
  43. J43.   S. E. Widmalm, H. E. K. Bae and D. Djurdjanovic, “Inaudible Temporomandibular Joint Vibrations”, Journal of Craniomandibular Practice Vol. 24, pp. 207-212, 2006.
  44. J. Barhak, D. Djurdjanovic, P. Spicer and R. Katz, “Integration of Reconfigurable Inspection with Stream of Variations Methodology”, International Journal of Machine Tools and Manufacture, Vol. 45, pp. 407-419, 2005.
  45. D. Djurdjanovic and J. Ni, “Measurement Scheme Synthesis in Multi-Station Machining Systems”, Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 126, No. 1, pp.178-189, 2004.
  46. T. Gruget and D. Djurdjanovic, “Optimal Reduction of Measurements in an Existing Manufacturing Process”, International Journal of Manufacturing Science and Production, Vol. 6, No. 3, pp. 103-117, 2004.
  47. D. Djurdjanovic and J. Ni, “Dimensional Errors of Fixtures, Locating and Measurement Datum Features in the Stream of Variation Modeling in Machining,” Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 125, pp. 716-730, 2003.
  48. D. Djurdjanovic and J. Ni, “Bayesian Approach to Measurement Scheme Analysis in Multi-Station Machining Systems,” Journal of Engineering Manufacture, Vol. 217, No. B8, pp. 1117-1130, 2003.
  49. D. Djurdjanovic, J. Lee and J. Ni, “Watchdog Agent – An Infotronics Based Prognostics Approach for Product Performance Degradation Assessment and Prediction”, International Journal of Advanced Engineering Informatics, Vol. 17, No. 3 -4, pp. 109-125, 2003.
  50. S. E. Widmalm, D. Djurdjanovic and D. C. McKay, “The dynamic range of TMJ Sounds”, Journal of Oral Rehabilitation, Vol. 30, pp. 495-500, 2003.
  51. S. E. Widmalm, W. J. Williams, D. Djurdjanovic and D. C. McKay, “The frequency range of TMJ Sounds,” Journal of Oral Rehabilitation, Vol. 30, pp. 335-346, 2003.
  52. N. Casoetto, D. Djurdjanovic, R. Mayor, J. Lee and J. Ni, “Multisensor Process Performance Assessment Through the Use of Autoregressive Modeling and Feature Maps,” SME Journal of Manufacturing Systems, Vol. 22, No. 1, pp. 64-72, 2003.
  53. D. Djurdjanovic and J. Ni, “Linear State Space Modeling of Dimensional Machining Errors”, Transactions of NAMRI/SME, Vol. 29, pp. 541-548, 2001.
  54. D. Djurdjanovic, S. E. Widmalm, W. J. Williams, C. K. H. Koh and K. P. Yang, “Computerized Classification of Temporomandibular Joint Sounds”, IEEE Transactions on Biomedical Engineering, Vol. 47, No. 8, pp. 977-984, 2000.

 

 

Book Chapters

      3 book chapters, all published after joining The University of Texas at Austin

  1. M. Musselman and D. Djurdjanovic, “Improvement of Belt Tension Monitoring in a Belt-Driven Automated Material Handling System,” Chapter 5.2 in the book Advances in Sustainable Manufacturing, (edited by G. Seliger, I. S. Jawahir and M. Khraisheh), Springer, pp. 135-141, 2011

-        Also available as a paper in Proc. of the 8th CIRP Global Conference on Sustainable Manufacturing (GCSM), Abu Dhabi, UAE, November 22-24, 2010, paper no. 77, 2010

  1. D. Djurdjanovic, J. Liu, K. A. Marko and J. Ni, “Immune Systems Inspired Approach to Anomaly Detection, Fault Localization and Diagnosis in Automotive Engines,” in Applications of Neural Networks in High Assurance Systems (edited by Y. Liu and J. Schumann), Springer, pp. 141-164, 2010.
  2. J. Lee, J. Ni, H. Wang and D. Djurdjanovic, “Intelligent Maintenance Systems”, Chapter 7.2 in the book titled Sustainability in Manufacturing - Recovery of Resources in Product and Materials Cycles (edited by Prof. Guenther Seliger), Springer, pp. 354-365, 2007.

 

Journals and Transactions (Submitted)

  1. K. Wang and D. Djurdjanovic, “Joint Optimization of Maintenance and Spare Part Logistics in a System of Distributed Assets,” submitted to European Journal of Operation Research, Paper No. EJOR-D-16-01206, 2016.
  2. Y. Xie and D. Djurdjanovic, “A Model Based Approach for Evaluating Human Neuromusculoskeletal System Performance,” submitted to Journal of Computer Methods and Programs in Biomedicine, Paper No. CMPB-2016-951, 2016.

 

Refereed Conference Papers:

      22 papers in refereed conference proceedings

      16 papers in refereed conference proceedings since joining The University of Texas at Austin

  1. D. Djurdjanovic, L. Mears, F. Niaki, A. Ul Haq and L. Li, “”, paper no. MSEC2017-3104, 2017.
  2. A. Ul Haq, K. Wang and D. Djurdjanovic, “Feature Construction for Dense Inline Data in Semiconductor Manufacturing Processes”, in Proc. of the 3rd IFAC Workshop on Advanced Maintenance Engineering, Service and Technology, Biarritz, France, October 19-21, 2016, Paper No. AMEST16_0053_MS, 2016.
  3. A. Ul Haq and D. Djurdjanovic, “Virtual Metrology Concept for Predicting Defect Levels in Semiconductor Manufacturing,” Proc. of the 49th CIRP Conference on Manufacturing Systems, May 25-27, 2016, Stuttgart, Germany, Paper No. 40, 2016.
  4. C. Jin, D. Djurdjanovic, H. D. Ardakani, K. Wang, M. Buzza, B. Begheri, P. Brown and J. Lee, “A comprehensive framework of factory-to-factory dynamic fleet-level prognostics and operation management for geographically distributed assets”, Proc. of the IEEE Conference on Automation Science and Engineering, August 24-28, 2015, Gothenburg, Sweden, pp. 225-230, 2015.
  5. M. Cholette and D. Djurdjanovic, “Model-Predictive Control and Closed-Loop Stability Considerations for Nonlinear Plans Described by Local ARX-Type Models,” 2013 ASME Dynamic Systems and Control Conference (DSCC), Palo Alto, CA, October 21-23, 2013, Paper no. 3973, 2013.
  6. D. Djurdjanovic, “Modeling and Prediction of Degradation in Complex Systems Operating Under Variable Operating Conditions,” Proc. of the 2012 International Dry Process Symposium, November 15-16, 2012, Tokyo, Japan, pp. 31-32, 2012.
  7. M. Celen and D. Djurdjanovic, “Joint Maintenance and Production Operations Decision Making in Flexible Manufacturing Systems,” 2012 ASME Manufacturing Science and Engineering Conference (MSEC), June 4-8, 2012 South Bend, IN, paper no. MSEC2012-7258, 2012.
  8. M. Celen and D. Djurdjanovic, “Operation-Dependent Maintenance Scheduling in Flexible Manufacturing Systems,” Proc. of the 44th CIRP Conference on Manufacturing Systems, Madison, WI, June 1-3, 2011, Paper No. 2141, 2011 (expanded version of this paper published as a journal publication J7)
  9. A. Bleakie and D. Djurdjanovic, “Dynamic Feature Monitoring Technique Applied to Thin Film Deposition Processes in an Industrial PECVD Tool,” Proc. of the 2011 ASME Manufacturing Science And Engineering Conference (MSEC), Corvallis, OR, June 13-17, 2011, Paper No. MSEC2011-50041, 2011.
  10. Y. Jiao and D. Djurdjanovic, “Compensability of Errors in Product Quality in Multistage Manufacturing Processes,” Proc. of the 39th SME North American Research Conference (NAMRC), Corvallis, OR, June 13-17, 2011 (extended version published in the SME Journal of Manufacturing Systems – see journal publication no. 4).
    1. Y. Liu and D. Djurdjanovic, “Topology Optimization for Piecewise Dynamic Models Using a Genetic Algorithm,” in Proc. of the 2010 ASME Dynamic Systems and Control Conference, September 13-15, Boston, MA, Paper No. 4180, 2010.
    2. M. Cholette and D. Djurdjanovic, “Precedent-Free Fault Isolation in a Diesel Engine EGR Valve System”, in Proc. of the 2009 ASME Dynamic Systems and Control Conference (DSCC), October 12-14, Hollywood, CA, paper no. 2706, 2009.
    3. Y. Jiao and D. Djurdjanovic, “Allocation Of Flexible Tooling For Optimal Stochastic Multistation Manufacturing Process Quality Control”, in Proc. of the 2008 ASME International Manufacturing Science and Engineering Conference (MSEC), October 7-10, 2008, Evanston, IL, paper no MSEC2008-72443, 2008.
    4. L. Jiang, D. Djurdjanovic and J. Ni, “A new method for sensor degradation detection, isolation and compensation in linear systems,” Proc. of 2008 ASME Int. Mech. Eng. Conference and Exposition (IMECE), Volume 9, Part B, 2008, Pages 1089-1102.
    5. J. Roth, L. Mears, D. Djurdjanovic, X. Yang and T. Kurfess, “Quality and Inspection of Machining Operations: Review of Condition-Monitoring and CMM Inspection Techniques 2000 to Present”, in Proc. of the 2007 ASME Manufacturing Science and Engineering Conference (MSEC), October 15-18, 2007, Atlanta, GA, paper no MSEC2007-31221, 2007.
    6. L. Li, D. Djurdjanovic and J. Ni, “Maintenance Task Prioritization Using Data Driven Bottleneck Detection And Maintenance Opportunity Windows”, in Proc. of the 2007 ASME Manufacturing Science and Engineering Conference (MSEC), October 15-18, 2007, Atlanta, GA, paper no. MSEC2007-31150, 2007.
    7. J. Liu, D. Djurdjanovic and J. Ni, “Identification and Anomaly Detection for PLC Controlled Automatic Tool Changer Using Timed Petri Net”, in Proc. of the 2007 ASME Manufacturing Science and Engineering Conference - MSEC, October 15-18, 2007, Atlanta, GA, paper no. MSEC2007-31222, 2007.
    8. D. Djurdjanovic, J. Liu, K. A. Marko and J. Ni, “Immune Systems Inspired Approach to Anomaly Detection and Fault Isolation for Engines,” in Proc. of the International Joint Conference on Neural Networks (IJCNN 2007), Orlando, FL, Paper no. 1369, 2007.
    9. D. Djurdjanovic and J. Zhu, “Stream of Variation Based Error Compensation Strategy in Multi-Station Manufacturing”, Proc. of the 2005 ASME International Mechanical Engineering Congress and Exposition (IMECE), November 5-11, Orlando, FL, Paper no. IMECE2005-81550, 2005.
    10. D. Djurdjanovic, J. Ni and J. Lee, “Time-Frequency Based Sensor Fusion in the Assessment and Monitoring of Machine Performance Degradation”, Proc. of 2002 ASME International Mechanical Engineering Congress and Exposition (IMECE), New Orleans, LA, Paper No. IMECE2002-32032, 2002.
    11. D. Djurdjanovic and J. Ni, “Stream of Variation Based Analysis and Synthesis of Measurement Schemes in Multi-Station Machining Systems”, Proc. of the 2001ASME International Mechanical Engineering Congress and Exposition (IMECE), New York City, NY, 2001.
    12. D. Djurdjanovic, W. J. Williams and C. K. H. Koh, “Discrete Implementation of Scale Transform,” Proc. of SPIE, Vol. 3807, pp. 522-533, 1999.
    13. K. P. Yang, D. Djurdjanovic, K. H. Koh, W. J. Williams and S. E. Widmalm, “Automatic Classification of the Temporomandibular Joint Sounds Using Scale and Time-Shift Invariant Representations of Their Time-Frequency Distributions,” Proc. of the 2002 IEEE Time-Frequency and Time-Scale Symposium, pp. 265-268, 1998.

 

 

Non-Refereed Conference Papers (requiring full paper submission):

      15 papers in non-refereed conference proceedings

      6 papers in non-refereed conference proceedings since joining The University of Texas at Austin

  1. A. Ul Haq and D. Djurdjanovic, “Precedent-Free Fault Localization for High Speed Train Drive Systems,” in Proc. of the Scientific-Expert Conference on Railways (RailCon), Nis, Serbia, pp. I – XI, 2014 (expanded version of the paper published as a journal paper J2)
  2. M. Cholette, D. Djurdjanovic and J. Rasberry, “Potential of use of Condition Based Monitoring in Semiconductor Manufacturing,” 23rd Annual Advanced Semiconductor Manufacturing Conference (ASMC) organized by the Semiconductor Equipment and Materials International (SEMI), Saratoga Springs, NY, paper no. 2.4, May 15-17, 2012.
  3. D. Djurdjanovic, “Artificial Immune Systems Engineering in Manufacturing,” in Proc. of the International Conference on Mechanical Engineering in the 21st Century, Nis, Serbia, November 25-26, 2010, pp. 251-255, 2010.
  4. D. Djurdjanovic, C. Hearn and Y. Liu, “Immune Systems Inspired Approach to Anomaly Detection, Fault Localization and Diagnosis in Complex Dynamic Systems”, in Proc. of the 2010 Conference on Grand Challenges in Modeling and Simulation (GCMS), Ottawa, ON, July 11-14, 2010, paper no. 71.
  5. Y. Liu, D. Djurdjanovic and J. Ni, “Predictive Modeling of Multivariate Stochastic Dependencies in Complex Manufacturing Processes”, Proceedings of the 2007 Semiconductor Research Corporation (SRC) Technical Conference (TechCon), Austin, TX, September 10-12, 2007. The paper was awarded Best Paper Award in the Factory Operations section.
  6. S. Li, D. Djurdjanovic and J. Ni, “Optimal Condition-Based Maintenance Decision-Making for a Cluster Tool,” Proc. of 2007 Semiconductor Research Corporation (SRC) Technical Conference (TechCon), Austin, TX, September 10-12, 2007.
  7. J. Zhou, D. Djurdjanovic, J. Simmons-Ivy and J. Ni, “Integrated Load-Allocation and Condition-Based Maintenance Policy in a Multi-Unit Load-Sharing Deteriorating System,” in Proc. of the 61st Meeting of the Society for Machinery Failure Prevention Technology (MFTP) in Virginia Beach, VA, pp. 215-228, April 17-19, 2007.
  8. J. Liu, P. Sun, D. Djurdjanovic, K. A. Marko and J. Ni, "Growing Structure Multiple Model System Based Anomaly Detection for Crankshaft Monitoring," Proc. of the 2006 International Symposium on Neural Networks (ISNN), Chengdu, China, pp. 396-405, 2006.
  9. Y. Liu, P. Kumar, J. Zhang, D. Djurdjanovic and J. Ni, “Predictive Modeling and Intelligent Maintenance Tools for High Yield Next Generation Fab”, Proc. of 2005 Semiconductor Research Corporation (SRC) Technical Conference (TechCon), Portland, OR, October 24-26, 2005. The paper was awarded Best Paper Award in the Factory Operations section.
    1. J. Lee, J. Ni, G. Seliger, D. Djurdjanovic, D. Odry, H. Qiu and D. Guido, “Preventive Maintenance of Railroad Bogies in Freight Train Applications”, Proc. of the 2004 Scientific-Expert Conference on Railways (RailCon) (invited paper), Nis, Serbia, pp. XIX – XXVI, 2004.
    2. J. Ni, J. Lee and D. Djurdjanovic, “Watchdog ­ Information Technology for Proactive Product Maintenance and its Implications to Ecological Product Re-Use”, Proc. of the Colloquium on e-Ecological Manufacturing (invited paper), Berlin, Germany, pp. 101-110, 2003.
    3. D. Djurdjanovic, J. Yang, H. Qiu, J. Lee and J. Ni, “Web-enabled Remote Spindle Monitoring and Prognostics,” Proc. of the 2003 International CIRP Conference on Reconfigurable Manufacturing Systems, Ann Arbor, MI, Paper no. D20, 2003
    4. D. Djurdjanovic and J. Ni, “Measurement Scheme Analysis in Multi-Station Machining Systems”, in Proc. of the 2002 International Conference on Frontiers of Design and Manufacturing, Dalian, P.R. China, Vol. 1, pp. 372-383, 2002.
    5. D. Djurdjanovic, C. K. H. Koh, W. J. Williams, S. E. Widmalm and K. P. Yang, “Automatic Recognition of the Source of Temporomandibular Joint Sounds,” Proc. of the Rocky Mountains Biomedical Symposium, Vol. 35, pp. 187-192, 1999.
    6. K. P. Yang, K. H. Koh, W. J. Williams, S. E. Widmalm and D. Djurdjanovic, “Bilateral Sound Propagation Characteristics In Electronic TMJ Sound Recording,” Proc. of the Rocky Mountains Biomedical Symposium, Vol. 35, pp. 181-186, 1999.

 

 


[1] Featured in the IIE Industrial Engineer Magazine, Vol. 46, No. 9, pp. 52, 2014 (magazine section titled “Research,” with executive summaries edited by Ronald Askin and Thomas O. Boucher).

[2] Invited by Prof. Neil Duffie to extend conference paper listed as RC4 in this CV for publication in a special edition of the CIRP Journal of Manufacturing Science and Technology dedicated to the 44th CIRP Conference on Manufacturing Systems

[3] Featured in the IIE Industrial Engineer Magazine, Vol. 42, No. 9, pp. 52-54, 2010 (magazine section titled “Research,” with executive summaries edited by Susan Albin and Joseph Hartman).

[4] One of 12 papers published during 2010 in the Transactions of IIE that were personally selected by Prof. Susan Albin, Editor in Chief of the Transactions of IIE, and made available for public access (see e-mail from Taylor and Francis from March 29, 2010).

[5] This article was the most downloaded paper from the ASME Journal of Dynamic Systems, Measurement and Control during September and October 2009 and was also among 10 most downloaded papers from that journal during August (3rd) and November (8th) of 2009. Source:

http://asmedl.org/journals/doc/ASMEDL-home/most_downloaded_list.jsp?KEY=...

[6] Featured in the IIE Industrial Engineer Magazine, Vol. 39, No. 12, pp. 46-49, 2007 (magazine section titled “Research,” with executive summaries edited by Candace Yano and Joseph Hartman).