R. Fievet, Tinney, C. E., Baars, W. J., and Hamilton, M. F., “Acoustic waveforms produced by a laboratory scale supersonic jet,” 20th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2014-2906. Atlanta, Georgia. USA, 2014.
The spatial evolution of acoustic waveforms produced by a Mach 3 jet are investigated using both 1/4 inch and 1/8 inch pressure field microphones located along rays emanating from the post potential core where the peak sound emission is found to occur. The measurements are acquired in a fully anechoic chamber where ground, or other large surface reflections are minimal. The calculation of the OASPL along an arc located at 95 jet diameters using 120 planar grid measurements are shown to collapse remarkably well when the arc array is centered on the post potential core region. Various statistical metrics, including the quadrature spectral density, number of zero crossings, the skewness of the pressure time derivative and the integral of the negative part of the quadrature spectral density, are exercised along the peak emission path. These metrics are shown to undergo rapid changes within 2 meters from the source regions of this laboratory scale jet. The sensitivity of these findings to both transducer size and humidity effects are discussed. A visual extrapolation of these nonlinear metrics toward the jet shear layer suggests that these waveforms are initially skewed at the source. An experimentally validated wave packet model is used to confirm the location where the pressure decay law transition from cylindrical to spherical. It is then used to estimate the source intensity which is required to predict the effective Gol’dberg number. 1